Free shipping & returns on all orders over $40
30 Day Money-Back Guaranteed
12 Month Hassle-Free Warranty
Secure Payment
Wireless Bluetooth
Experience improved sound quality, greater range and extended battery life with Bluetooth 4.0. Also featuring Qualcomm® aptX which increases digital streaming efficiency and improves overall dynamic range.
Active Noise Cancelling
BT 220 NC blocks out 95 percent ambient sound. The ANC removes low frequency noise from your soundscape, allowing you to focus on enjoying your music instead of being distracted by outside noise.
Long Battery Life
Phiaton’s 40mm drivers feature an optimized vibration system that adds extra emphasis on high frequency clarity and improved sound stage. Phiaton also added power oversized Neodymium magnets providing rich, commanding bass.
EverPlay - X
Multipoint connection technology enables you to connect one Phiaton headphone to two devices at the same time. You can use any two Bluetooth enabled devices simultaneously, such as your smartphone and tablet or your smartphone and laptop saving you the hassle of connecting and disconnecting from one device to another.
Tech Specs
Tech Specs
BT220NC
Bluetooth Chip
Qualcomm aptX
High Quality Dynamic Speakers Unit
14.3 mm
Frequency Range
10 Hz ~ 27 kHz
Impedance
32 Ohm
THD
Less than 1% at 1 kHz
Sensitivity
100 dB at 1 kHz
Communication Network
Bluetooth 4.0
Operating Range
Within 10 m / 33 ft.
Call Time
10 hrs / 16 hrs (NC on / off)
Music Play Time
10 hrs / 17 hrs (NC on / off)
Standby Time
26 hrs / 300 hrs (NC on / off)
FAQ
My device will not charge.
Check to see whether the USB charging cable has been properly connected with the device. Confirm whether the PC power is on and that it has been properly connected. When using a separately purchased USB AC adaptor, check to see that it has been properly connected.
Why is the quality of sound low:
If the 'Bluetooth Device' you are trying to connect with this device is accessed to HSP, change the access to A2DP.
The LED Indicator does not operate:
Confirm whether the LED Indicator feature has been activated. (The LED Indicator feature can be activated by simultaneously pressing the (+) button and (-) Button for 3 seconds)
FAQ
Got questions? We’ve got answers.
If you have some other questions, feel free to send us an email to support@phiaton.com. For general inquiries please check our FAQ page.